GEM GPS3600 Owner's Manual page 168

Select All (F7)
Use Select All (F7) to select all the Blocks con-
tained in the Hard disk.
Execute (F8)
Use EXECUTE (F8) to start the backup process.
HARD DISK RESTORE
Use the HARD DISK RESTORE function to load
backup data from floppy disk back into the Hard
Disk.
RESTORING BACKUP DATA TO THE HARD DISK
1. Insert the Floppy disk containing the back-
up file or files into the drive.
2. Select Hard Disk Restore and press ENTER
to activate the function.
The floppy disk may contain more than one
backup file (shown with the ".AR" extension),
3. Select the file to restore to the Hard disk
and press ENTER to confirm.
Confirming the backup file selection opens a
second level display showing the Floppy disk
directory on the left and a column on the right
where you can prepare a list of backup data
to decompress.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4•26 Reference Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4. Prepare a list containing the block(s) to re-
store.
Select a Block and press ENTER to insert it
into the list. The cursor moves down to the
next empty location automatically.
Repeat the operation for other blocks
If you attempt to insert a Block that has al-
ready been inserted, an appropriate warning
is displayed. Press ESCAPE to cancel the
warning and select a different Block.
5. Press EXECUTE to start the hard disk restore
process.
When the Hard Disk Restore has finished, a
message is displayed saying: "Operation
completed".
If the Hard Disk Restore operation requires
more than one disk, a dialogue appears re-
questing the insertion of disk n. 2 and so on.
HARD DISK RESTORE OPTIONS
Delete (F5)
Select DELETE (F5) to cancel a block from the
list.
The Delete option does not cancel a Block from
the Restore directory.
Reset (F6)
Select RESET (F6) to cancel a list containing two
or more Blocks in a single step.
Select All (F7)
Use Select All (F7) to select all the Blocks con-
tained in the Restore directory.
Execute (F8)
Press EXECUTE (F8) to start the restore proc-
ess.
○ ○