GEM GPS3600 Owner's Manual page 161

6. Pass into the destination directory to select
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
the destination.
If necessary, select a Block in the Hard disk
and press ENTER to access then select a
destination.
7. Press ENTER twice to copy the file to the des-
tination.
Note: It is not possible to copy a file to itself. At-
tempting to do so prompts the following message :
Press ENTER or ESCAPE to close the win-
dow and repeat the operation by copying to
a different destination.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Disk 4•19
○ ○