GEM GPS3600 Owner's Manual page 188

Erase
This editor cancels events.
ERASE TRACK (F5)
Allows you to work on a single Track of the Style.
PARAMETERS:
Variation: Selects one of the 4 Variations. Only
Variations that contain at least one recorded riff
can be selected.
Riff: Selects one of the riffs of the selected Vari-
ation. Only existing riffs can be selected. If the
Style is empty, the phrase «No Riff» appears.
Event type: Determines the type of event to be
erased. Duplicate note eliminates the note with
the lowest velocity value when two notes of the
same pitch start at the same position.
Options: All, Duplicate note, Note, Pitch Bend,
Mono touch, Poly touch, Velocity Off,
ProgramChange, ControlChange 00...31,
ControlChange 64...127.
Note range from... to...: Sets the upper and
lower limits of the notes to cancel. To cancel a
single percussive instrument of the Drum track,
assign the same note to the highest and lowest
limit. For example, to cancel the snare (D2) set
the parameter to «Note range from D2 to D2».
Assignable values: C-1 ... G9.
From locator... To locator...: Determines the start
and end point of the part to cancel. It is possible to
specify the measure, beat and resolution.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5•16 Reference Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Assignable values: within the actual limits of the
riff. It is not possible to specify a point beyond
the end of the riff.
ERASE RIFF (F6)
Here you can erase all the tracks of a Riff.
PARAMETERS:
Same as ERASE TRACK but without the Note
Range From...To... parameter.
ERASE VARIATION (F7)
Here you can erase a Style Variation.
ERASE STYLE (F8)
Here you can cancel the entire Style.
○ ○