Play All Songs - GEM GPS3600 Owner's Manual

Play All Songs

Use the PLAY ALL SONGS button to play all the
Songs or MidiFiles present on a floppy disk or in
a Hard Disk Block. If a disk is already inserted in
the drive, the PLAY ALL SONGS function en-
gages the disk. If a disk is not inserted in the
drive, the Hard Disk is engaged automatically.
Refer to the Song chapter of the Reference Guide
for information regarding how to use all the Play
All Songs options.
This feature works just like pressing play on a
CD player!
1. Insert a PS Songs disk or MidiFile data disk
into the drive and press the PLAY ALL SONGS
button.
PS/GPS starts to scan the disk contents and,
shortly after, a Song starts to play back.
When the first Song or MidiFile ends, a sec-
ond sequence begins (there will be a short
pause while the second song is accessed).
Playback continues non-stop until all the
Songs or MidiFiles on disk have been played.
When the last Song or MidiFile reaches the
end, playback stops automatically.
2. Stop the playback at any time by pressing
STOP or START/STOP.
Playback stops instantly.
3. Start the playback from the point it was
stopped by pressing PLAY.
4. Press the STOP button twice to stop and es-
cape from the PLAY ALL SONGS function.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1•38 Quick Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
2
3
4
○ ○
OR