Edit Song - GEM GPS3600 Owner's Manual

Edit Song

After recording a Song using either the RECORD
method or the QUICK REC method, it can be
modified using the functions of the EDIT SONG
MENU.
ENTERING EDIT SONG
Select the Song you wish to modify.
Press EDIT button to open the main EDIT menu.
Select the EDIT SEQ. function and press ENTER
to gain access to the EDIT SONG parameters.
Entering this section the first time opens the main
menu (page 00/10). On all successive occasions,
the last page selected is recalled.
ESCAPE FROM EDIT SONG
To escape from EDIT SONG press ESCAPE
(once or twice, depending on the currently se-
lected level).
To escape without closing the edit page, press
the EDIT button. To pass to another edit envi-
ronment, use the +/– PAGE buttons.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
6•14 Reference Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
THE EDIT SONG MENU
The Edit Song menu contains 10 Song Editing
functions:
Erase, Move, Copy, Quantize, Insert Measure,
Delete Measure, Velocity, Transpose, Micro-
scope, Master Track.
Three options are also available: Undo, Edit
Score and Song name.
Let's examine first the options.
UNDO (F2), EXECUTE UNDO (F3)
When this parameter is selected (shown in nega-
tive highlight), the UNDO function is enabled.
Undo cancels the last operation or series of op-
erations carried out. This function consumes
exactly the same amount of RAM memory as
the Song. If there is a shortage of memory in
RAM, it is a good idea to deactivate UNDO.
Press the EXECUTE UNDO button (F3) to ex-
ecute the desired Undo operation.
You will be prompted with a request to confirm
the operation with ENTER or cancel with ES-
CAPE.
If UNDO is disabled, pressing EXECUTE UNDO
button and confirming with ENTER activates the
following user message:
Press ESCAPE to close the window and repeat
the UNDO operation, this time with UNDO ena-
bled.
○ ○