North Star DIMENSION Service Manual page 75

TROUBLESHOOTING
(cont.) Printer Problems in MAINT
Symptom
Explanation
Solution
A printer
exists on the
system and
MAINT
doesn't permit
editing or
deleting its
parameters.
If an edit is
attempted,
MAINT says,
"Can't find
driver" or
"Can't open
driver," and
A001
quits.
An attempt
has been
made to edit
the printer
profiles.
If, for example , the system has two printers, SERIAL 1
and SERIAL 2, and someone decides to reverse them,
they might call up the first one and edit SERIAL 1 to
become SERIAL 2. This would work. But if they then
called up the second one and edited SERIAL 2 to
become SERIAL 1, this would fail. The driver for
SERIAL 1 was deleted when they made the first
change.
Run UPDATE to delete the printer configuration
entirely. Then reinstall the printers.
DIMENSION Service Manual 2-29