North Star DIMENSION Service Manual page 142

DIAGNOSTICS
Service Diskette #2 (cont.)
Procedure : Fixed Disk Drive Extension Cable Installation
7. Attach the unconnected ends of the three extension cables to the
remote fixed disk drive circuit board.
Note: Orient the fixed disk drive with the rear edge of the drive
facing the front of the central module and the circuit board facing
down. Attach the ribbon cables with their red stripes facing the disk
drive side of the central module.
8. Proceed to format, label and test the remote fixed disk drive.
This concludes the procedure for installing the fixed disk drive
extension cable set.
3-30 DIMENSION Service Manual