North Star DIMENSION Service Manual page 45

PERIPHERAL EQUIPMENT INSTALLATION
(cont.) Local Modems
Procedure: Local Modem Installation
1. Connect one end of a serial cable to the serial port of the
workstation connector box. Firmly fasten the cable using the
screws attached to the cable connector.
2. Connect the other end of the cable to the serial port of the
modem . Firmly fasten the cable using the screws attached to
the cable connector.
3. Connect the modem main power cable to a 115VAC (or 230VAC)
wall outlet.
This completes the installation procedure for a local modem.
Technical Manual 1-33