North Star DIMENSION Service Manual page 42

PERIPHERAL EQUIP14ENT INSTALLATIQI
Local Printers (cont.)
Procedure : Local Serial Printer Installation
1. Connect one end of a serial printer cable to the serial port
of the workstation connector box. Firmly fasten the cable
using the screws attached to the cable connector.
2. Connect the other end of the cable to the serial port
connector of your printer. Firmly fasten the cable using
the screws attached to the cable connector.
3. Connect the printer main power cable to a 115VAC (or 230VAC)
wall outlet.
This completes the installation procedure for a local serial
printer.
1-30 Technical Manual