North Star DIMENSION Service Manual page 30

SYSTEM HARDWARE INSTALLATION
Workstation (cont.)
Procedure: Workstation Installation and Configuration
1. Route the uncoiled workstation cables to the workstations.
2. Notice that each
keyboard cable ends
workstation
in a six-pin plug. connector box
This plug mates with
6-pin receptacle
a six-pin receptacle
in a workstation
connector box.
Attach all the
keyboard cables to
their respective
connector boxes.
3. A video display
cable, which extends
from each connector
box, ends in a plug.
This plug mates with
a receptacle on the
back panel of a
video display.
Attach all the video
display cables to
their respective
video display
video displays . cable plug
1-18 Technical Manual