Loading Service Diskette #3 - North Star DIMENSION Service Manual

DIAGNOSTICS
Service Diskette #3 (cont.)
Loading The test must be stored in and run from the fixed disk
Service drive. The following files must be present for the
Diskette #3 diagnostic program to run:
* TBU.EXE
* INITXX.VAL
* INIT09.VAL
Note : As the test runs, it creates another file called
ERROR.LOG. This file stores results.
Procedure :
Loading Service Diskette #3
1. Boot DIMENSION DOS 1.2.0 or later from the fixed disk drive.
2. When the DIMENSION sign -on display appears, sign on as the system
manager.
3. Type Manager On to enter manager mode.
4. Create a directory called "TAPE" in the manager 's personal partition,
and copy the files from Service Diskette # 3 into the directory.
5. Load the test program by typing:
TBU [Retrn]
3-46 DIMENSION Service Manual