High Beam Indicator; Battery Condition Indicator; Temperature Indicator - Arctic Cat 2008 Prowler Owner's Manual

NOTE: The speed and tach functions may be switched by pressing
the Set/Reset Button.
9. Differential Lock Indicator - Displays LOCK when the differential lock has
been engaged.
10. Drive Select Indicator - Displays 4WD when selected by the 2WD/4WD
selector switch or when the differential lock is engaged.
38
11. High Beam Indicator - The High
Beam icon will appear only when the
lights are on high beam.
12. Battery Condition Indicator - The
word VOLT will flash on the LCD
whenever a low voltage (< 9 DC volts)
or high voltage (>16 DC volts) is
CF101A
detected.
13. Temperature Indicator - The high tem-
perature icon will flash and the speed/
tach needle will sweep full scale if the
engine overheats. After 30 seconds,
the speed/tach needle will return to
normal, but the temperature icon will
CF098A
continue to flash. The icon should not
be visible during normal operation.
CF099A
��