Initial Unit Setup; Quick Setup Screen; Figure 18 - Admin Password Screen; Figure 19 - Quick Setup Screen - PACOM 4-CHANNEL User Manual

4-channel digital video recorder

Hide thumbs Also See for 4-CHANNEL:

Table of Contents

User's Manual

Initial Unit Setup

Before using your DVR for the first time, you will want to establish the initial settings. This

includes items such as time and date, display language, camera, audio, remote control, record mode,

network and password. Your DVR can be set up using various screens and dialog boxes.

Press the

button to enter the setup screens. The Admin Password screen appears.

Figure 18 — Admin Password screen.

Enter the password by pressing the appropriate combination of camera number buttons and then the

button. The factory default password is 4321. There are two Setup screens: Quick Setup and

Normal Setup. The factory default is the Quick Setup screen.

Figure 19 — Quick Setup screen.

The Quick Setup screen allows you to set up the most commonly used features of your DVR. Use

the arrow buttons to move through the options. Pressing the

button lets you make your

selections.

Highlight the box beside Quick Setup and press the

button to toggle between On and Off. If

you select Off, you will use the Normal Setup screen to change the DVR's settings.

Highlight the first box beside Recording Speed/Quality, and select recording speeds from as few

as 0.5 ips to as fast as 30 ips (25 ips for PAL).

Table of Contents