Cannot Send Faxes At A Specified Time; Cannot Receive Faxes; Memory Full Error Occurs - Epson L565 User Manual

User's Guide
❏ If the recipient machine does not pick up your call within 50 seconds after the printer has finished dialing, the
call ends with an error. Dial using a connected telephone to check how long it takes before you hear a fax tone. If
it takes more than 50 seconds, add pauses after the fax number to send the fax. Press
hyphen is entered as the pause mark. One pause is about three seconds. Add multiple pauses as needed.
❏ If you have selected the recipient from the contacts list, verify that the registered information is correct. If the
information is correct, select the recipient from the contacts list, press the
the Add Entry screen, change Fax Speed to Slow(9,600bps).
Related Information
"Sending Faxes Dialing from the External Phone Device" on page 68
&
"Managing Contacts" on page 32
&
"Cannot Send or Receive Faxes" on page 114
&

Cannot Send Faxes at a Specified Time

Set the date and the time correctly on the control panel.
Related Information
"Sending Faxes at a Specified Time (Send Fax Later)" on page 69
&
"Setup Mode" on page 18
&

Cannot Receive Faxes

❏ If you have subscribed to a call forwarding service, the printer may not be able to receive faxes. Contact the
service provider.
❏ If you have not connected a telephone to the printer, set the Receive Mode setting to Auto on the control panel.
Related Information
"Fax Settings" on page 20
&
"Cannot Send or Receive Faxes" on page 114
&

Memory Full Error Occurs

❏ If the printer has been set to save received faxes on a computer, turn on the computer that is set to save the
faxes. Once the faxes are saved in the computer, they are deleted from the printer's memory.
❏ Even though the memory is full, you can send a monochrome fax by using the Direct Send feature. Or divide
your originals into two or more to send them in several batches.
❏ If the printer cannot print a received fax due to a printer error, such as a paper jam, the memory full error may
occur. Solve the printer problem, and then contact the sender and ask them to send the fax again.
Related Information
"Saving Received Faxes" on page 72
&
"Fax Mode" on page 17
&
"Removing Jammed Paper" on page 100
&
Solving Problems
116
to enter the pause. A
r
button, and then select Edit. On