Various Ways Of Receiving Faxes; Receiving Faxes Manually - Epson L565 User Manual

User's Guide

Various Ways of Receiving Faxes

Receiving Faxes Manually

When you connect a telephone and set the Receive Mode setting of the printer to Manual, follow the steps below
to receive faxes.
1. When the telephone rings, pick up the handset.
2. When you hear a fax tone, select Receive on the printer's control panel.
Note:
If you enable the Remote Receive feature, you can start receiving a fax just by using the connected telephone.
x
3. Press the button, and then hang up the handset.
Related Information
"Receiving Faxes Using a Connected Telephone (Remote Receive)" on page 71
&
"Saving Received Faxes" on page 72
&
Receiving Faxes Using a Connected Telephone (Remote Receive)
To receive a fax manually, you need to operate the printer after you pick up the handset of the telephone. By using
the Remote Receive feature, you can start receiving a fax just by operating the phone.
The Remote Receive feature is available for telephones that support tone dialing.
Related Information
"Receiving Faxes Manually" on page 71
&
Setting Up Remote Receive
1. Enter Setup from the home screen.
2. Select Fax Settings > Receive Settings > Remote Receive.
3. After enabling Remote Receive, enter a two digit code (0 to 9, *, and # can be entered).
4. Press the OK button.
Using Remote Receive
1. When the telephone rings, pick up the handset.
2. When you hear a fax tone, enter the start code using the telephone.
3. After confirming that the printer has started receiving the fax, hang up the handset.
Faxing
71