Paper Does Not Feed Correctly - Epson L565 User Manual

Hide thumbs Also See for L565:
Table of Contents

Advertisement

User's Guide
4. Remove the jammed paper
5. Raise the ADF input tray, and then remove the jammed paper.
6. Close the ADF cover.

Paper Does Not Feed Correctly

Check the following if the paper jams, paper is fed at a slant, several sheets of paper are fed at a time, no paper is
fed, or paper is ejected.
❏ Place the printer on a flat surface and operate in the recommended environmental conditions.
❏ Use paper supported by this printer.
❏ Follow the paper handling precautions.
❏ Load paper in the correct direction, and slide the edge guide against the edge of the paper.
❏ Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load
above the line indicated by the triangle symbol on the edge guide.
❏ When a paper out error occurs although paper is loaded in the printer, reload paper against the right edge of the
rear paper feed.
❏ Load one sheet of paper at a time when loading multiple sheets of paper.
❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is
loaded in the paper source before you reload the paper.
❏ Printing may have been paused for a certain length of time which causes the printer to eject the paper.
Solving Problems
104

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents