Setup Mode - Epson L565 User Manual

User's Guide
Menu Settings and Explanations
Fax Report Fax Settings List
Fax Log
Last Transmission
Protocol Trace
Related Information
"Sending Many Pages of a Monochrome Document (Direct Send)" on page 69
&
"Sending Faxes at a Specified Time (Send Fax Later)" on page 69
&
"Receiving Faxes by Polling (Polling Receive)" on page 72
&

Setup Mode

Menu Settings and Explanations
Maintenance Print Head Nozzle
Check
Print Head Cleaning
Reset Ink Levels
Print Head
Alignment
Paper Guide
Cleaning
Paper Setup Select the paper size and paper type you loaded in the paper source.
Print Status Sheet Configuration Status
Sheet
Printer Settings Paper Source
Settings
PC Connection via
USB
Printer Basics
Prints the current fax settings.
Displays or prints a history of sent and received fax jobs. You can set to print
this report automatically using the following menu.
Setup-Fax Settings-Output Settings--Fax Log Auto Print
Prints a report for the previous fax that was sent or received through polling.
Prints a detailed report for the previous fax that was sent or received.
Prints a pattern to check if the print head nozzles are clogged.
Cleans clogged nozzles in the print head.
Select this feature to reset the ink levels before you refill the ink tanks.
Adjusts the print head to improve print quality.
Perform this feature if your printouts look blurry or text and lines are
misaligned.
Perform this feature to clean the roller inside the printer when the printout
are smeared or scuffed.
Prints an information sheet showing the current printer status and
settings.
A4/Letter Switching Enable this feature so that error messages are not
displayed even when the paper size setting for
the print job and the paper loaded in the paper
source do not match. This feature is only available
when the paper size is set to A4 or Letter.
Error Notice Displays an error message when the paper size or
type settings in Paper Setup and the print
settings do not match.
Enables the printer which is connected to the computer over a USB
connection. If this feature is disabled, the computer does not recognize
printers with a USB connection.
18