Troubleshooting Guide; Power On/Off - Jensen JiPS-200i User Manual

Symptom
The unit does not
respond (no power).
iPod/iPhone /iPad
does not respond to
the speaker system.
iPod/iPhone /iPad
does not charge.
Remote control
No functions or short
range.

TROUBLESHOOTING GUIDE

Possible Problem
AC Adaptor is not
plugged into a wall
outlet or the
connector is not
plugged into the
power supply jack on
the back of the unit.
Wall outlet is not
functioning.

POWER ON/OFF

switch is set to OFF.
iPod/iPhone/iPad is
not installed properly.
Your
iPod/iPhone/iPad is
locked up.
iPod/iPhone/iPad is
not in iPod mode.
iPod/iPhone/iPad is
not installed properly.
iPod/iPhone/iPad is
locked up/ frozen.
iPod/iPhone/iPad
battery has problem.
Battery exhausted
Plug the AC adaptor into a wall outlet
and plug the connector into the supply
jack on the unit.
Plug another device into the same
outlet to confirm the outlet is working.
Set the POWER ON/OFF switch to
ON.
Remove your iPod/iPhone/iPad from
the dock and check for obstruction on
the connectors in the dock and on
your iPod/iPhone/iPad. Then reseat it
on the dock.
Please make sure that your
iPod/iPhone/iPad is working properly
before docking into the unit. Please
refer to your iPod/iPhone/iPad manual
for info on resetting the
iPod/iPhone/iPad.
Make sure the function of
iPad/iPod/iPhone is set to Music
or iPod mode.
Remove your iPod/iPhone/iPad from
the dock and check for obstruction on
the connectors in the dock and on
your iPod/iPhone/iPad. Then reseat it
on the dock.
Please make sure your
iPod/iPhone/iPad is working properly
before docking into the unit. Please
refer to your iPod/iPhone/iPad manual
for details on resetting.
- Insert a new battery.
- Aim remote directly towards the
remote sensor.
9
Solution