Care And Maintenance; Cleaning The Unit - Jensen JiPS-200i User Manual

Docking speaker system for ipad, iphone and ipod
Table of Contents

Advertisement

your external device then you may need to adjust both the volume control of your
external device and the volume control of this system to find the most desirable
volume setting.
(2) Press the ON/Standby
standby mode when you finish listening. Don't forget to switch off the power of your
external device as well.
(3) Unplug the AUX IN cable if you want to listen to iPod mode.
If the system does not respond or has erratic or intermittent operation, you may have
experienced an electrostatic discharge (ESD) or a power surge that triggered the
internal computer to shut down automatically. If this occurs, simply disconnect the main
power, wait one minute and reconnect the main power again.
1.
Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2.
Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
3.
Unplug the unit from the electrical power outlet immediately in case of malfunction.

CLEANING THE UNIT

To prevent fire or shock hazard, disconnect your unit from the AC power source
when cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other
furniture, Use caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax
or polish sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned
with a soft cloth slightly dampened with a mild soap and water solution. Never use
abrasive cloths or polishes as these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.
button on the remote control to place the system into
RESETTING

CARE AND MAINTENANCE

8

Advertisement

Table of Contents
loading

Table of Contents