Troubleshooting Guide - Jensen JIMS-260I User Manual

Symptom Possible Problem
AC Adaptor is not plugged
into a wall outlet or the
The unit does not connector is not plugged into
the power supply jack on the
respond (no
power). back of the unit.
Wall outlet is not functioning.
Using no/wrong iPod
Adaptor.
iPod does not
dock properly.
iPod does not install
properly.
iPod/iPhone is not installed
properly.
iPod/iPhone does
not respond to the
speaker system. Your iPod/iPhone is locked
up.
Unit turned to CD or radio
mode.
iPod/iPhone is not installed
iPod/iPhone does
properly.
not charge.
iPod/iPhone is locked up/
frozen. iPod/iPhone battery
has problem.
You have tuned to a mono
station or the station is too
FM STEREO
indicator does not
weak.
light up
FM MONO MODE is set.
Volume level is set too high.
Sound is distorted.
Sound source is distorted.
CD mode is not selected.
CD Player does
CD is not installed or
not play.
installed incorrectly.
CD skips while
Disc is dirty or scratched.
playing.
Unit gets warm
after extended
This is normal.
play at high
volume.

TROUBLESHOOTING GUIDE

Plug the AC adaptor into a wall outlet and plug the
connector into the supply jack on the unit.
Plug another device into the same outlet to confirm
the outlet is working.
Make sure the dock insert is the proper fit for your
iPod.
Remove your iPod from the dock and check for
obstruction on the connectors in the dock and on
your iPod. Then reseat it in the dock.
Remove your iPod/iPhone from the dock and check
for obstruction on the connectors in the dock and
on your iPod/iPhone. Then reseat it on the dock.
Please make sure that your iPod/iPhone is working
properly before docking into the unit. Please refer
to your iPod/iPhone manual for info on resetting the
iPod/iPhone.
Select other modes for iPod charging.
Remove your iPod/iPhone from the dock and check
for obstruction on the connectors in the dock and
on your iPod/iPhone. Then reseat it in the dock.
Please make sure your iPod/iPhone is working
properly before docking into the unit. Please refer
to your iPod/iPhone manual for details on resetting.
Select another FM station or extend or
rotate the wire antenna for best reception.
Set the FM MODE to STEREO.
Decrease the volume.
If the iPod/iPhone original sound source is of poor
quality, distortion and noise are easily noticed with
high-power speakers. Try a different audio source
such as a music CD.
If you are using an external sound source like older
generation of iPod, try reducing the output volume
on the device itself. Also try turning bass boost
OFF or change the EQ setting.
Press the FUNCTION switch to select CD mode.
Press the CD onto spindle, printed side facing up.
Wipe with cloth or use another disc.
Turn the unit off for a period of time or lower
volume.
19
Solution