Remote Control; Connecting The Ac Power; Installation - Jensen JiPS-200i User Manual

REMOTE CONTROL

1.
Power ON / Standby
2.
Volume Down (-) Button
3.
Volume Up (+) Button
4.
Play/Pause
5.
iPod Repeat Button
6.
SKIP/Fast Backward
7.
SKIP/Fast Forward
8.
iPod Menu Button
9.
iPod Enter Button
10.
iPod Menu UP
11.
iPod Menu DOWN

CONNECTING THE AC POWER

An AC-DC Adaptor with 5V DC 2500mA output (included) is required for operating the
main unit. Connect the AC-DC Adaptor to the unit and AC outlet:
1.) Firmly and securely insert the DC plug of the adaptor into the DC Jack on the unit
2.) Plug the Adaptor plug into an AC outlet rated at 120V~ 60Hz.
NOTE: This unit is not magnetically shielded and may cause color distortion on the
screen of some TVs or video monitors. To avoid this, you may need to move the unit
further away from the TV or monitor if unnatural color shifts or image distortion occurs.
Remote Control
The remote control operates on one CR2025 battery (included).
To activate the remote control, remove the insulation tab inserted
in the battery compartment.
When the operation of the remote control becomes intermittent
or unsatisfactory, replace the original battery with a new 3-volt
lithium battery.
1.) Slide out the battery holder from the remote control case.
2.) Replace the 3V CR2025 battery. Be sure the battery is
Button
Button
Button
Button
Button
Button

INSTALLATION

1
2
4
6
8
9
5
3
5
7
10
11
CR2025