Table of Contents
Advertisement
Programming Table for Remote Controls
Feature
Arm/Disarm/Panic
Two Stage Unlock
Accessory(-) Output for
Boot Release (disarmed only)
Silent Arm/Disarm
Accessory(-) Output Timed
Accessory(-) Output
Pulsed/Latched
Remote Sensor Bypass
All Channel Learn
Instant Code Deletion
NOTE: When assigning channels to different buttons from factory you must "All Channel Learn" a
transmitter and then change the individual assignments with feature number 20 to 25 as required.
©
2002 Directed Electronics, Inc.
Factory Setting
No. of Chirps
Button Channel 1
Button Channel 2
Button Channel 3
Button Channel 4
+
Button Channel 5
+
Button Channel 6
—
—
Secondary Action
20
Press any remote button(s). The siren will
chirp once for confirmation.
21
Press any remote button(s). The siren will
chirp twice for confirmation.
22
Press any remote button(s). The siren will
chirp 3 times for confirmation.
23
Press any remote button(s). The siren will
chirp 4 times for confirmation.
24
Press any remote button(s). The siren will
chirp 5 times for confirmation.
25
Press any remote button(s). The siren will
chirp 6 times for confirmation.
26
Press
once to confirm factory preset order.
27
Wait 3 seconds. The siren will chirp twice.
All remotes are erased from memory.
button. The siren will chirp
21
Advertisement
Table of Contents
