Personal Identification Number (Pin); Entering Your Pin - Directed Electronics Avital Maxx3 Installation Manual

Personal Identification Number (PIN)

Each system has an individual four-digit PIN. In order to access Valet mode or any of the programmable features,
you must first enter the PIN, one number at a time.
NOTE: To enter a zero, simply turn the ignition on and then off without pressing the Valet switch.

Entering Your PIN

1. Turn the ignition key to the ON position.
2. Enter the first number in your PIN. Press and release the Valet switch the same number of times as the first
digit in your PIN. Example: If your PIN is 2345, press the Valet switch two times.
3. Turn the ignition key OFF.
4. Turn the ignition key to the ON position.
5. Enter the second number in your PIN. Press and release the Valet switch the same number of times as the
second digit in your PIN. Example: If your PIN is 2345, press the Valet switch three times.
6. Turn the ignition key OFF.
7. Turn the ignition key to the ON position.
8. Enter the third number in your PIN. Press and release the Valet switch the same number of times as the third
digit in your PIN. Example: If your PIN is 2345, press the Valet switch four times.
9. Turn the ignition key OFF.
10. Turn the ignition key to the ON position.
11. Enter the last number in your PIN. Press and release the Valet switch the same number of times as the last
digit in your PIN. Example: If your PIN is 2345, press the Valet switch five times.
12. Turn the ignition key OFF. If you have entered the correct code you will hear two chirps (one short and one
long). Should you hear five rapid chirps, the correct code has not been entered. Begin entering your PIN from
the beginning.
13. To enter Valet mode, now turn the ignition on and press and hold the Valet switch for three seconds until
the LED illuminates constantly. The system will automatically exit Valet mode the next time the ignition is
switched ON.
18
©
2002 Directed Electronics, Inc.