Control Buttons - GE FP1/4200 Use And Care Book Manual

LATCHING
SLOT
LOCKING
TABS
FLUTED
DRIVE WHEEL
CONTROL BUTTONS
NOTE: If Bowl does not imme-
diately drop down, made sure unit
is unplugged, lift off and slightly
turn Fluted Drive Wheel in center
of Round Well by hand (G).
Replace Bowl. It should drop
down easily with only a slight
turning motion. Make sure Bowl is
seated and firmly in place before
using appliance.
8
t Bow together. pos1t1on
ng over Center Post - 1t
s o ne er be placed in the
Sc -On Rmg (E). Fit Cente
ost, with rubber ring in place,
t1 rough openmg m bottom of
Bowl. Attach Screw-On Ring
(D)
by turning m clockwise
(~)
d1rection. Tighten securely, out
do not overtighten.
*
To attach Bowl to Base, hold
bowl with "FRONr facing you
(F). Set Screw-On Ring section of
Bowl into Round Well area of
Base. Rotate Bowl until Locking
Tabs on bottom of Bowl drop
down into Locking Holes in Base.
Twist Bowl clock ise
<rl>
as
far as 1t will go. Be certain both
Lockmg Tabs drop down into
place.