Plu Sales Report; Department Programming Report; Plu Programming Report; Cash Register Programming Report - Olivetti ECR 5100 User Manual

PLU Sales Report

1. Slide the control switch to the X or Z position (bear in mind
that a Z PLU Report resets all PLU totals to zero).
2. Press .
Date
PLU number

Department Programming Report

This report provides a printout showing how your depart-
ments are programmed. It provides the status, associated
VAT and associated price for each department.
1. Control switch position: PRG
2. Press

PLU Programming Report

This report provides a printout showing how the PLUs are
programmed. Their number, associated price, VAT rate (if
applicable), item descriptor and associated department are
reported on this receipt.
1. Control switch position: PRG.
2. Press .

Cash Register Programming Report

This report provides a printout showing how your cash
register is programmed. It lists the values that are pro-
grammed for all system options, the VAT rates, foreign
currency exchange rates and percent minus value pro-
grammed, the manager password and training mode pass-
word assigned, and the three-digit security code assigned to
the clerk.
1. Control switch position: PRG
2. Press

Training Report

This report provides an X or Z report of the transactions
performed in the training mode. Like the ordinary X and Z
financial reports, a Z report resets all transaction totals to
zero and provides the same information as an ordinary X or
Z financial report with the exception that the report identifier
is "X0" or "Z0".
X report
1. Control switch position: X or Z. Bear in mind that in the Z
identifier
position the training report contents are cleared.
PLU quantity 2. If a training mode password was defined, type the
sold
[4-digit password] and press
PLU sales
total
3. Press
All PLU
sales total
.

Clearing the Grand Total

1. Control switch position: PRG
2. Press
.
.
.
.
11