Copying
Reducing or enlarging copies
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, navigate to:
Copy > Scale > specify a scale value
Notes:
•
Changing the size of the original document or output after setting Scale restores the scale value to
Auto.
•
Auto is the factory default setting. It adjusts the scan image of the original document to fit the size of
the paper onto which you are copying.
3
Send the copy job.
Collating copies
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Copy, and then set Collate to On.
3
Send the copy job.
Placing separator sheets between copies
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Copy > Separator Sheets.
3
Adjust the settings.
4
Send the copy job.
Copying multiple pages onto a single sheet
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Copy > Pages Per Side.
3
Adjust the settings.
4
Send the copy job.
Creating a copy shortcut
1
From the home screen, touch Copy.
2
Adjust the settings, and then touch
3
Enter a shortcut name.
4
Apply the changes.
.
32