Advanced Network - D-Link DIR-860L User Manual

Section 3 - Configuration
This page allows you to change some of the advanced network settings of the DIR-860L. It is recommended that you only change these settings if
you are familiar with their functions and proper settings, or are instructed to do so.
Enable UPnP: To use the Universal Plug and Play (UPnP
on Enabled. UPnP provides plug and play functionality
with compatible networking equipment, software and
peripherals.
WAN Ping:
Checking the box will allow the DIR-860L to respond
to pings. Unchecking the box may provide some extra
security from hackers.
WAN Ping Inbound Select from the drop-down menu if you would like to apply
Filter: the Inbound Filter to the WAN ping. Refer to the Inbound
Filters section for more information.
WAN Port Speed: You may set the port speed of the Internet/WAN port to
10 Mbps, 100 Mbps, 1000 Mbps, or Auto (recommended).
Enable IPv4 Check the box to allow multicast traffic to pass through
Multicast Streams: the router from the Internet (IPv4).
Enable IPv6
Check the box to allow multicast traffic to pass through
Multicast Streams:
the router from the Internet (IPv6).
Click Save.Settings to save the current configuration.
D-Link DIR-860L User Manual

Advanced Network

) feature click
™
88