Port Forwarding - D-Link DIR-860L User Manual

Section 3 - Configuration
This page will allow you to open a single port or a range of ports.
Name:
Enter a name for the rule or select an application from the drop-down
menu. Select an application and click to populate the fields.
IP Address:
Enter the IP address of the computer on your local network that you
want to allow the incoming service to. If your computer is receiving
an IP address automatically from the router (DHCP), your computer
will be listed in the "Computer Name" drop-down menu. Select your
computer and click <<.
TCP/UDP:
Enter the TCP and/or UDP port or ports that you want to open. You can
enter a single port or a range of ports. Separate ports with a comma.
Example: 24,1009,3000-4000
Schedule:
The schedule of time when the Virtual Server Rule will be enabled. The
schedule may be set to Always, which will allow the particular service
to always be enabled. You can create your own times in the Tools >
Schedules section.
Inbound Filter:
Select Allow.All (most common) or a created Inbound filter. You may
create your own inbound filters in the Advanced.>.Inbound.Filter
page.
Click Save.Settings to save the current configuration.
D-Link DIR-860L User Manual

Port Forwarding

72