Time - D-Link DIR-860L User Manual

Section 3 - Configuration
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you
can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically adjust the time when needed.

Time:

Displays the current date and time of the router.
Time Zone:
Select your Time Zone from the drop-down menu.
Enable Daylight
To select Daylight Saving time manually, select enabled or
Saving: disabled, and enter a start date and an end date for daylight
saving time.
Enable NTP Server: NTP is short for Network Time Protocol. An NTP server will
synchronize the time and date with your router. This will only
connect to a server on the Internet, not a local server. Check
the box to enable this feature.
NTP Server Used: Enter the IP address of an NTP server or select one from the
drop-down menu.
Manual: To manually input the time, enter the values in these fields
for the Year, Month, Day, Hour, Minute, and Second and then
click Set.Time.
You can also click Sync.Your.Computer's.Time.Settings to
sync the date and time with that of the computer you are
currently using.
Click Save.Settings to save the current configuration.
D-Link DIR-860L User Manual
Time
93