Qos Engine - D-Link DIR-860L User Manual

Section 3 - Configuration
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are
disabled and application priority is not classified automatically.
Enable QoS
This option is disabled by default. Enable this option for better
Engine: performance and experience with online games and other interactive
applications, such as VoIP.
Uplink Speed:
Using the drop-down menu, select the uplink speed of your Internet
connection. ISPs often state speed as a download/upload pair
(eg: 1.5 Mbps/284 Kbps). Using this example, you would enter 284.
Downlink Speed:
Using the drop-down menu, select the downlink speed of your Internet
connection.
Queue Type:
Select the queueing method that you wish to use for the QoS engine. If
you select Strict.Priority.Queue, the QoS engine will use preset priorities
for each of the Queue IDs listed in the Classification Rules section below.
If you select Weighted.Fair.Queue, you can assign a percentage of the
total weighting to be assigned to each of the Queue IDs used in the
Classification Rules section below.
Classification
A QoS Engine Rule identifies a specific message flow and assigns a
Rules:
priority to that flow. For most applications, automatic classification will
be adequate, and specific QoS Engine Rules will not be required.
The QoS Engine supports overlaps between rules, where more than
one rule can match for a specific message flow. If more than one rule is
found to match, the rule with the highest priority will be used.
Name:
Create a name for the rule that is meaningful to you.
Queue ID:
Select a desired priority level for the rule from the drop-down menu.
This priority level will be used to determine the importance of this rule
according to the priority rule selected in the QoS Setup above.
D-Link DIR-860L User Manual

QoS Engine

74