Advanced Wireless - D-Link DIR-860L User Manual

Section 3 - Configuration
This page allows you to change some of the advanced wireless settings of the DIR-860L. It is recommended that you only change these settings if
you are familiar with their functions and proper settings, or are instructed to do so.
This section will allow you to adjust the settings for the 2.4GHz.band
Wireless Band
Transmit Power: Set the transmission power of the antennas for the 2.4 GHz band.
WLAN Partition: This enables 802.11d operation. 802.11d is a wireless specification
developed to allow implementation of wireless networks in
countries that cannot use the 802.11 standard. This feature
should only be enabled if you are in a country that requires it.
WMM Enable: WMM is QoS for your wireless network. This will improve the
quality of video and voice applications for your wireless clients.
HT20/40 Enable this option to reduce interference from other wireless networks
Coexistence: in your area. If the channel width is operating at 40MHz and there is
another wireless network's channel over-lapping and causing interference, the router will automatically change to 20MHz.
This section will allow you to adjust the settings for the 5.GHz.band.
Wireless Band:
Transmit Power: Set the transmission power of the antennas for the 5 GHz band.
WLAN Partition: This enables 802.11d operation. 802.11d is a wireless specification developed to allow implementation of wireless networks
in countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.
WMM Enable: WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients.
Click Save.Settings to save the current configuration.
D-Link DIR-860L User Manual

Advanced Wireless

85