Hardware Overview LEDs Version 1.0 Page 2 of 14...
Page 4
Hardware Overview Connections Version 1.0 Page 3 of 14...
Page 5
Admin Login Page If this is your first time installing the router, open your web browser and, enter The IP address of the router (default: http://192.168.1.1) a. Give the default Username and Password to login to the router (Username and Password will be mentioned on the sticker at the back of your router) Note: If no admin password mentioned, use “admin”...
Page 6
1) WAN Setting ( Setup INTERNET Connection ) To configure wan settings, Go to Network » WAN » WAN IPv4 Configuration Auto via ACS Connection Mode – ( For ETISALAT Plug & Play Connection ) *All configuration including username, password and Vlan Id information will be pushed by Etisalat ACS.
Page 7
b) ISP Connection type - PPPoE (Manual) Give the Username and Password provided by your ISP in the User Name and Password column and save the settings, enable Vlan only if it is required by ISP. Version 1.0 Page 6 of 14...
Page 8
2) LAN Setting & DHCP To change lan setting and DHCP , Go to Network » LAN » LAN IPv4 Configuration . By default the IP address is 192.168.1.1 & DHCP Pool is 100 ~254 Version 1.0 Page 7 of 14...
3) Wireless Configuration Go to Wireless » Profiles Then Right click and Edit 2.4GHz or 5GHz to change the SSID and Security. a. 2.4 GHz b. 11AC 5 GHz Version 1.0 Page 8 of 14...
4) Port Forwarding a. To create port forwarding rules , Go to Security » Firewall » Port Forwarding and then “Add New Port Forwarding Rule”, You can choose the predefined services or the added custom services. b. Custom services Go to Security»...
Page 12
5) Firewall Rules To add firewall rule to allow or deny network access, go to Security » Firewall » Firewall Rules IPv4 and “Add New IPv4 Firewall Rule”, Version 1.0 Page 11 of 14...
Page 13
6) Parental Control First Enable Content Filtering Go to Security » Content Filtering Then Go to Security » Content Filtering » Blocked Keywords and “ Add New Blocked Keyword” , Version 1.0 Page 12 of 14...
Page 14
We can also Schedule the URL blocking, Go to Security » Firewall » Schedules and “Add New Schedule “, Then Go to Security » Content Filtering and Select the schedule you have created , Version 1.0 Page 13 of 14...
Page 15
7) Dynamic DNS To enable Dynamic DNS Go to Network » Advanced » DDNS 8) To Reset & Reboot the router Go to Administration »Firmware » Backup/Restore ----------------------END------------------ Version 1.0 Page 14 of 14...