Advanced Network Settings - D-Link DIR-825 User Manual

Section 3 - Configuration
Enable UPnP: To use the Universal Plug and Play (UPnP) feature click on
Enabled. UPnP provides compatibility with networking
equipment, software and peripherals.
Enable WAN Ping Checking the box will allow the DIR-825 to respond to
Response: pings. Unchecking the box may provide some extra
security from hackers.
WAN Port Speed: You may set the port speed of the Internet port to
10 Mbps, 100 Mbps or Auto (recommended).
Enable IPV4 Check the box to allow multicast traffic to pass through
Multicast Streams: the router from the Internet (IPv4).
Enable IPV6 Check the box to allow multicast traffic to pass through
Multicast Streams: the router from the Internet (IPv6).
D-Link DIR-825 User Manual

Advanced Network Settings

88