D-Link DIR-860L User Manual page 59

Section 3 - Configuration
IPv6.over.PPPoE
After selecting the IPv6 over PPPoE option, you will be able to configure the IPv6
Internet connection that requires a username and password to get online. Most
DSL modems use this type of connection.
The following parameters will be available for configuration:
PPPoE Session: Select the PPPoE Session value used here. This
option will state that this connection shares its
information with the already configured IPv6
PPPoE connection, or the user can create a new
PPPoE connection here.
User Name: Enter the PPPoE username used here. If you do not
know your user name, please contact your ISP.
Password: Enter the PPPoE password used here. If you do not
know your password, please contact your ISP.
Verify Password: Re-enter the PPPoE password used here.
Service Name: Enter the service name for this connection here.
This option is optional.
Click on the Next button to continue. Click on the Prev button to return to the
previous page.
Click on the Cancel button to discard all the changes made and return to the main
page.
D-Link DIR-860L User Manual 55