Tools; Admin - D-Link DIR-860L User Manual

Section 3 - Configuration
This page will allow you to change the Administrator password. You can also enable Remote Management. Admin has full read/write access to the
router's settings.

Admin

Here you can enter a new password for the Administrator Login Name. The
Password:
administrator can make changes to the settings. Enter the new password
twice for verification.
Gateway Name:
Enter a name for your router.
Enable Graphical
Enables a CAPTCHA challenge-response test, which requires users to type
Authentication:
letters or numbers from a distorted image displayed on the screen. This
prevents unauthorized users from using automated methods to gain
access your wireless network.
Enable HTTPS
Check to enable HTTPS to connect to the router securely. This means
Server:
to connect to the router, you must enter https://dlinkrouter.local. or
https://192.168.0.1 (for example) instead of http://dlinkrouter.local..or
http://192.168.0.1.
Enable Remote
Remote management allows the DIR-860L to be configured from the
Management:
Internet by a web browser. A username/password is still required to access
the Web Management interface.
Remote Admin
The port number used to access the DIR-860L is used in the URL. For example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address
Port:
of the DIR-860L and 8080 is the port used for the Web Management interface. If you have enabled HTTPS.Server, you must enter https://
as part of the URL to access the router remotely.
Remote Admin
This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the
Inbound Filter:
Delete icon to remove the rule. Details will display the current status of the rule.
Click Save.Settings to save the current configuration.
D-Link DIR-860L User Manual

Tools

Admin
92