Draft 802.11Ac (5 Ghz) - D-Link DIR-860L User Manual

Section 3 - Configuration
Enable.Wireless:
Check the box to enable the wireless function. If you do not want to use
wireless, uncheck the box to disable all the wireless functions.
Schedule:
Select the time frame that you would like your wireless network enabled.
The schedule may be set to Always. Any schedule you create will be
available in the drop-down menu. Click New. Schedule to create a
schedule.
Wireless.Network.
Service Set Identifier (SSID) is the name of your wireless network. Create
Name:
a name for your wireless network using up to 32 characters. The SSID is
case-sensitive.
802.11.Mode:
Select one of the following:
Mixed.802.11ac,.802.11n,.and.802.11a - Select if you are using 802.11ac,
802.11n, and 802.11a wireless clients.
Mixed.802.11ac.and.802.11n - Select if you are using both 802.11ac and
802.11n wireless clients.
Mixed.802.11a.and.802.11n - Select if you are using both 802.11a and
802.11n wireless clients.
802.11ac.Only - Select if all of your wireless clients are 802.11ac.
802.11n.Only - Select only if all of your wireless clients are 802.11n.
Enable.Auto.
The Auto.Channel.Scan setting can be selected to allow the DIR-860L to
Channel.Scan:
choose the channel with the least amount of interference.
Wireless.Channel:
Indicates the channel setting for the DIR-860L. By default the channel
is set to 6. The channel can be changed to fit the channel setting for an
existing wireless network or to customize the wireless network. If you
enable Auto.Channel.Scan, this option will be greyed out.
Transmission.
This should be set to Best.(automatic) for optimal performance.
Rate:
D-Link DIR-860L User Manual

Draft 802.11ac (5 GHz)

40