Recording - Yamaha CDR1000 Owner's Manual

38
Chapter 5—Recording

Recording

This section explains how to record.
The following illustration shows the procedure for recording.
Record
Ready
mode
REC
(Recording can also be
started by pressing the
[PAUSE] button or
Prepare for recording as explained on page 32.
1
From stop, press the [REC] button to engage Record Standby mode.
2
Record Standby mode is engaged, the PAUSE indicator lights up, and the REC indica-
tors flash. If the loaded disc is a blank disc, track 1 is selected for recording. If it's a par-
tially recorded disc, the next available track is selected.
In Record Standby mode, the selected input source can be monitored via the ANALOG
OUT, AES/EBU OUT, COAXIAL OUT, or PHONES, and metered on the CDR1000
level meters.
You can cancel Record Standby mode by pressing the [STOP] button.
The time counter can be set to display the elapsed record time, remaining record time,
or total record time. See "Setting the Time Display" on page 21 for more information.
If recording via the ANALOG IN, use the REC LEVEL control to set the recording
3
level in conjunction with the level meters.
It's okay for the "–1" meter segment to light up occasionally, but back off the level a little
if the "CLIP" segment lights up, otherwise the recording will be distorted. The record-
ing level can be set independently for the left and right channels. The recording level for
the AES/EBU IN and COAXIAL IN is determined by the source and cannot be set on
the CDR1000.
A two-second mute can be inserted at the beginning of a track by using the Rec Mute
function. See "Inserting a Two-second Mute" on page 44 for more information.
Press the [PLAY] or [PAUSE] button to start recording.
4
Recording starts, the PAUSE indicator goes out, the REC indicators light up continu-
ously, the PLAY indicators light up, and the time counter starts counting. If the Fade In
function is set, fade in processing is performed. See "Applying a Fade In" on page 46 for
more information.
CDR1000—Owner's Manual
1
Tn=1
PLAY
Recording starts
Press the [PAUSE] button again
(or [PLAY] button or footswitch)
footswitch)
2
PAUSE
Record Ready mode
to resume recording
Tn=2
STOP
Recording stops