Yamaha CDR1000 Owner's Manual page 16

K
INDEX buttons
These buttons are used to select indexes. Pressing the previous INDEX [
selects the previous index. Pressing the next INDEX [
See "Selecting Indexes" on page 27 for more information.
L
SEARCH buttons
These buttons are used to search backwards and forwards at high speed during play-
back or playback pause. Pressing and holding the backward SEARCH [
searches backwards. Pressing and holding the forward SEARCH [
forwards. See "Searching" on page 27 for more information.
M
PAUSE button
This button is used to pause and resume playback and recording. When recording is
paused, the CDR1000 waits in Record Standby mode. The PAUSE indicator appears on
the display when playback is paused or in Record Standby mode.
N
STOP button
This button is used to stop playback and recording.
O
PLAY button & indicator
This button is used to start playback and recording. The PLAY indicator lights up dur-
ing playback and recording. See "Playing Discs" on page 24 for more information.
P
REC button & indicator
This button is used to engage Record Standby mode. The REC indicator flashes in
Record Standby mode and lights up continuously while recording. See "Recording" on
page 38 for more information.
Q
PHONES LEVEL control
This control is used to adjust the volume level of the phones. See "Monitoring" on page
22 for more information.
R
PHONES jack
A pair of stereo headphones can be connected to this stereo phone jack for monitoring.
See "Monitoring" on page 22 for more information.
The following illustration shows the wiring scheme for the headphones.
S
FOOT SW jack
An optional footswitch can be connected to this jack and used to start and stop play-
back and recording. See "Using a Footswitch" on page 59 for more information.
1/4" TRS phone plug Ring (right)
Sleeve (ground)
Front Panel
] button
] button selects the next index.
] button
] button searches
Tip (left)
CDR1000—Owner's Manual
9