Yamaha CDR1000 Owner's Manual page 57

50
Chapter 5—Recording
Start playback on the CD, DAT, or MD player.
4
Recording starts, the PAUSE indicator goes out, the REC indicators light up continu-
ously, the PLAY indicators light up, and the time counter starts counting. The index
counter is incremented as and when Index Numbers are received.
Note: If no input signal is received for 10 seconds or more during Sync Recording, Record-
ing stops automatically.
When the next Track Number, Start ID, or Skip ID is received, the [PAUSE] button or
[STOP button pressed, or the source CD or MD finishes, the CDR1000 stops recording
and cancels One-track Sync Recording mode. If the Rec Mute function is set, mute pro-
cessing is performed. "SYNC-REC 1" disappears from the display, all lit indicators go
out, and "WAIT" appears on the display while the PMA is written.
The track counter displays the number of the last track recorded, and the time counter
(in Elapse mode) displays its length in minutes and seconds.
To record another track using One-track Sync Recording, repeat steps 3 through 4.
If the Auto Finalize function is on, the disc is finalized automatically.
Recording stops automatically if the disc in the CDR1000 becomes full, or the word-
clock lock between the source device and the CDR1000 is lost, in which case the LOCK
indicator flashes.
CDR1000—Owner's Manual