Configure Notification - LevelOne WHG-1000 User Manual

4.5.6

Configure Notification

WHG-1000 can automatically send the notification of Traffic Log, On-Demand Log, Session Log and Billing
Report to 3 particular E-mail addresses. A trial email is provided by the system for validation. Please click on
Service Domain → Notification, the page of Notification E-mail Setup will appear

SMTP Server Setup :
 Enabled : Click Enabled to activated SMTP Server
 Sender From : The E-mail address of the administrator in charge of monitoring. This will show up as the
sender's E-mail.
 SMTP Server : The IP address / Domain of the sender's SMTP server.
 Port : The port of the sender's SMTP server. (Default is 25)
Sometimes SMTP server use Port 587 for TLS encryption and Port 465 for SSL encryption
 Encryption : Some SMTP server need encryption linking for sending E-mail. The system provides
encryption for sender's SMTP server
 SMTP Auth : Some SMTP server need authentication username and password for sending E-mail. The
system provides authentication for sender's SMTP server
 Username : The sender's authentication username for STMP server
 Password: The sender's authentication password for STMP server
WHG-1000 300Mbps Wireless PoE Hotspot Gateway
99
User's Manual