LevelOne WHG-1000 User Manual page 31


IP Setup :
 VLAN Tag(ID) : Virtual LAN, the system supports 7 tagged VLAN port (VLAN1 ~ VLAN7). The valid values
are from 1 to 4094. The default VLAN1's tag ~ VLAN7's tag are from 101 to 107.
Some system and VLAN switch do not support VLAN tag 1
 IP Address : The IP address of the LAN/VLAN port; The default LAN's IP address as 192.168.2.254, and
the default VLAN1's ~ VLAN7's IP address as 192.168.101.1 ~ 192.168.107.1.
 IP Netmask : The Subnet mask of the VLAN port; default Netmask is 255.255.255.0

Bandwidth Control : By default, it's "Disable". To "Enable" to use bandwidth control.
 Type : Enable the desire option among "Even Distribution of Bandwidth" or "Individual Bandwidth"
 Even Distribution of Bandwidth : Set users distribute Total Max. Upload/Download. Below depicts an
example for Even Distribution of Bandwidth, set Total Max. Upload or Download to 9 Mbps, if one user
access Internet, the maximum upload or download is 9 Mbps; if three users access Internet at the same
time, the maximum upload or download is 3 Mbps by each user.
WHG-1000 300Mbps Wireless PoE Hotspot Gateway
31
User's Manual