LevelOne WHG-1000 User Manual page 9


QoS Enforcement
 Packet classification via DSCP (Differentiated Services code Point )
 Traffic Statistics
 Diff/TOS
 IEEE 802.1Q Tag VLAN priority control
 IEEE 802.11e WMM
 Automatic mapping of WMM priorities to 802.1p and IP DSCP
 Upload and Download Traffic Management

Wireless
 Transmission power control : 7 Levels
 Channel selection : Manual or Auto
 No. of associated clients per AP : 32
 Setting for max no associated clients : Yes
 No. of BBSID (Virtual AP) : 8
 No. of Max. WDS setting : 4
 Preamble setting : Short / Long
 Setting for 802.11b/g/n mix, 802.11b only or 802.11 b/g only or 802.11n only
 Setting for transmission speed
 IEEE802.11f IAPP ( Inter Access Point Protocol ), hand over users to another AP
 IEEE802.11i Preauth (PMSKA Cache)
 IEEE802.11d Multi country roaming
 Automatic channel assignment
 Coordinated Access ensures optimal performance of nearby APs on the same channel
 Secure wireless bridge connects access points without wire
 Monitoring and reporting

System Administration
 Intuitive Web Management Interface
 Three administrator accounts
 Provide customizable login and logout portal page
 CLI access (Remote Management) via Telnet and SSH
 Remote firmware upgrade (via Web)
 Utilities to backup and restore the system configuration
 Remote Link Test – Display connect statistics
 Full Statistics and Status Reporting
 Real time traffic monitor
WHG-1000 300Mbps Wireless PoE Hotspot Gateway
9
User's Manual