LevelOne WHG-1000 User Manual page 106

 LOGIN : Denote the user login to the hotspot service
 LOGOUT : Denote the user logout to the hotspot service
 IDLE TIMEOUT : Denote the user idle time is over timeout setting of Service Domain, the system will
logout user automatically
 USE UP : Denote the quota of time of user is over
 SESSION TIMEOUT : Denote the user session timeout for connecting to remote RAIDUS
 VOLUME USE UP : Denote the quota of volume of user is over
 KICK : Denote the system kick out the user
 TIME OUT OF RANGE : Denote the service time out of range
 Passcode/Username : Denote the user's passcode or username.
 IP : Denote the user's IP address
 MAC : Denote the user's MAC address
 Packets In : Denote the current user's packets in.
 Bytes In : Denote the current user's bytes in.
 Packet Out : Denote the current user's packets out.
 Bytes Out : Denote the current user's bytes out.

On-Demand Log :
As shown in the following figure, each line is traffic history record consisting of 14 fields : Date, Status,
Passcode/Username, IP, MAC, Packets In, Bytes In, Packets Out, Bytes Out, Start Time, End Time, Plan,
Payment Type and Cost
 Date : Denote current event's date and time
 Status : There will show 10 types of status as below :
 LOGIN : Denote the user login to the On-Demand service
 LOGOUT : Denote the user logout to the on-demand service
 IDLE TIMEOUT : Denote the user idle time is over timeout setting of Service Domain, the system will
logout user automatically
 USE UP : Denote the quota of time of user is over
 VOLUME USE UP : Denote the quota of volume of user is over
 KICK : Denote the system kick out the user.
 TIME OUT OF RANGE : Denote the service time out of range
WHG-1000 300Mbps Wireless PoE Hotspot Gateway
106
User's Manual