Chapter 3. Base Installations; Installations; System Requirements; Panel Function Descriptions - LevelOne WHG-1000 User Manual

Chapter 3. Base Installations

3.1

Installations

3.1.1

System Requirements

 Standard 10/100Base T including five network cables with RJ-45 connectors
 All PCs need to install the TCP/IP network protocol
3.1.2

Panel Function Descriptions

1. Power SOCKET (12V DC) : Attach the power socket here.
2. Reset : Press the Reset button once to restart the system, The LED except Power indicator will be off
before restarting.
3. LAN(POE) : Clients devices connect to WHG-1000 via LAN ports
4. WAN1/WAN2 : Two WAN ports are available on the system.
5. Console : The serial RS-232 DB9 cable attaches here.
6. Scan Button :
 Press and hold the Scan button for 3 seconds until STATUS LED FLASH and release to Scan New AP's
Channel.
 Press and hold the Scan button for more than 10 seconds until SYSTEM LED FLASH to reset the
system to default configurations.
7. USB : (option)
WHG-1000 300Mbps Wireless PoE Hotspot Gateway
Front Panel
12
User's Manual