LevelOne WHG-1000 User Manual page 55


Ping Interval : specify time interval (in seconds) between the ICMP "echo requests" are sent by the Ping
Watchdog Tool. Default is 300 seconds.

Startup Delay : specify initial time delay (in seconds) until first ICMP "echo requests" are sent by the Ping
Watchdog Tool. The value of Startup Delay should be at least 60 seconds as the network interface and
wireless connection initialization takes considerable amount of time if the device is rebooted. Default is 300
seconds.
 Failure Count To Reboot : specify the number of ICMP "echo response" replies. If the specified number of
ICMP "echo response" packets is not received continuously, the Ping Watchdog Tool will reboot the device.
Change these settings as described here and click Save button to save your changes. Click Reboot button to
activate your changes
Without a valid certificate, users may encounter the following problem in IE8 when they try to access WHG-1000's
GUI (https://192.168.2.254). There will be a "Certificate Error", because the browser treats WHG-1000 as an illegal
website.
Click "Continue to this website" to access the WHG-1000's GUI. The WHG-1000's Home page will be appear.
WHG-1000 300Mbps Wireless PoE Hotspot Gateway
55
User's Manual