Configuring The Pppoe Mode; Preparation - Huawei SmartAX MT882 User Manual

2) Click Create a new connection in the displayed page.
3) Click Next in the New Connection Wizard dialog box.
4) Choose Connect to the Internet and click Next.
5) Choose Set up my connection manually and click Next.
6) Choose Connect using a broadband connection that
requires a username and password and click Next.
7) Enter the name of the connection you are creating. Then click
Next.
8) Choose Anyone's use or My use only and click Next.
9) Enter the username and password. Then click Next.
10) Click Finish.

4.4 Configuring the PPPoE Mode

In the PPPoE mode, the MT882 uses the built-in PPP dial-up
software for dialing. The MT882 functions as a router to connect your
computer to the network.
This chapter describes how to configure the MT882 to work in the
PPPoE mode. It also describes how to configure your computer to
access the network through the MT882.
4.4.1

Preparation

Table 4-3 lists the configuration items.
Table 4-3 Configuration items for the PPPoE mode
PVC mode
Item Configuration
Routing
34