Expresscard Problems; Hardware Device Problems; Hard Disk Drive Problems - Getac B300 User Manual

Press the Fn+F5 hot key to toggle through the display options or change
the Display Settings Properties in Windows.

ExpressCard Problems

The ExpressCard does not work.
Make sure that the ExpressCard is correctly seated.
If the card requires an IRQ (Interrupt ReQuest), make sure that there is
one available.
The ExpressCard stops communicating properly.
The application may have been reset when the computer is turned off or
in Sleep mode. Exit and restart the application.

Hardware Device Problems

The computer does not recognize a newly installed device.
The device may not be correctly configured in the BIOS Setup program.
Run the BIOS Setup program to identify the new type.
Make sure if any device driver needs to be installed. (Refer to the
documentation that came with the device.)
Make sure if the device needs any jumper or switch settings. (Refer to
the documentation that came with the device.)
Check the cables or power cords for correct connections.
For an external device that has its own power switch, make sure that the
power is turned on.

Hard Disk Drive Problems

The hard disk drive error message appears on the screen.
The hard disk drive has defects. Ask your dealer for help.
8-5
Troubleshooting