Expresscard Problems; Hardware Device Problems - Getac S400G User Manual

Simultaneous display/multi-display does not work.
Make sure that you turn on the external monitor before turning on the

computer.
Press the Fn+F5 hot key to toggle through the display options or change

the Display Settings Properties in Windows.

ExpressCard Problems

The ExpressCard does not work.
Make sure that the ExpressCard is correctly seated.

If the card requires an IRQ (Interrupt ReQuest), make sure that there is

one available.
The ExpressCard stops communicating properly.
The application may have been reset when the computer is turned off

or in Sleep mode. Exit and restart the application.

Hardware Device Problems

The computer does not recognize a newly installed device.
The device may not be correctly configured in the BIOS Setup

program. Run the BIOS Setup program to identify the new type.
Make sure if any device driver needs to be installed. (Refer to the

documentation that came with the device.)
Make sure if the device needs any jumper or switch settings. (Refer to

the documentation that came with the device.)
Check the cables or power cords for correct connections.

For an external device that has its own power switch, make sure that

the power is turned on.
7-5
Troubleshooting