Power Management Problems; Software Problems - Getac B300 User Manual

Power Management Problems

The computer does not enter Sleep or Hibernation mode
automatically.
If you have a connection to another computer, the computer does not
enter Sleep or Hibernation mode if the connection is actively in use.
Make sure that the Sleep or Hibernation time-out is enabled.
The computer does not enter Sleep or Hibernation mode
immediately.
If the computer is performing an operation, it normally waits for the
operation to finish.
The computer does not resume from Sleep or Hibernation mode.
The computer automatically enters Sleep or Hibernation mode when the
battery pack is empty. Do any one of the following:
−
Connect the AC adapter to the computer.
−
Replace the empty battery pack with a fully charged one.
The computer does not enter Hibernation mode with the Fn+F12 hot
keys.
Make sure that the Hibernation function is specified for the sleep
button.
You might be using a PC card that prevents the computer from entering
Hibernation mode. To enter the mode, stop the communication program
and then remove the card or stop the card.

Software Problems

An application program does not work correctly.
Make sure that the software is correctly installed.
If an error message appears on the screen, consult the software
program's documentation for further information.
8-9
Troubleshooting