Operating Methods; Manual Cooking; Programmed Cooking - eka EKF 1111 E UD Use And Instruction Manual

Electronic Ovens rev. 0 __________________________________ EKF 1111 E UD – EKF 1064 E UD – EKF 1016 E UD

3.7 Operating methods

3.7 3.7 3.7 Operating methods Operating methods Operating methods
3.7.1 Manual 3.7.1

Manual cooking

cooking
3.7.1 3.7.1 Manual Manual cooking cooking
After turning the oven ON (green led off), set the various cooking parameters.
Set the cooking time (shown on the time display) using the knob no. "1":
- "inF" (stages excluded /stage led off)
- from 1 minute to 4 hours per stage ("inF" excluded / stage leds alight)
Set the cooking temperature (shown on the temperature display) for one or more stages, using
knob no. "2":
- cooking chamber (from 50°C to 270°C / led alight on )
- core probe (from 0°C to 100°C / led alight on
- ∆T / DELTA-T (from 0°C to 100°C/ led alight on ∆ ∆ ∆ ∆ T T T T )
Set the cooking climate (shown on the led bar) for one or more stages, using knob no. "3":
- neutral (white led alight)
- only steam (all 10 blue leds alight /100%)
- variable steam (blue leds 1 to 9 alight /from 10 to 90)
Set the pre-heating function (optional) pressing the push button
Set the motors at ½ speed function (optional) for one or more stages, pressing the push button
.
Press the push button
Remember: Remember Remember Remember
1. If the cooking cycle is not controlled by the core probe and has been divided in one or
more timed stages, the oven turns off automatically when the set time for the single
stage or all the different stages together is over. If an "inF" (infinite) time has been set,
the oven continues until the operator turns it off manually pressing the push button
2. If the cooking cycle is controlled by the core probe and has been divided in one or more
stages, timed if required, when the temperature set on the probe is reached it passes
onto the next stage; if it has been set for a single stage, timed if required, or for an "inF"
time, the cycle finishes and the oven turns off automatically, no matter what time was
set for the stage.

3.7.2 Programmed cooking

3.7.2 3.7.2 3.7.2 Programmed cooking Programmed cooking Programmed cooking
When the cooking programs have already been stored (a cooking cycle corresponds to each
program number for a specific type of food) it is very easy to use them.
Turn the oven ON (green light off) select the stored program number (shown on the program
display) using the push buttons
Press the push button
At the end of the cooking cycle the oven turns of automatically and the beeper sounds for 10
seconds.
Remember Remember: Before beginning the cooking cycle, the parameters can be checked that have Remember Remember
been set for the four stages (pres the push button
if wished. For the changed parameters to become operative, they must be stored
(press the push button
_________________________________________________________________________________________ page 19
to start the cooking cycle.
or .
to start the cooking cycle.
until the confirming beep is heard).
)
.
) and they can be changed
.